SAKEC is an Autonomous Institute Affiliated to University of Mumbai

EXTC Events

 “Meditation for Mental Health” Session – Celebrate World Mental Health Day 

In celebration of World Mental Health DayIKS SAKEC, in collaboration with TLC SAKEC, the EXTC Department, and the Isha Foundation, invites you to a rejuvenating session on:

🧘‍♀️ Meditation for Mental Health
based on Sadhguru’s Miracle of Mind Program

This session aims to promote mindfulness, inner balance, and overall well-being through guided meditation and reflection.

Date: 14th October 2025
🕙 Time: 10:00 AM to 11:00 AM
📍 Venue: Auditorium, 7th Floor

🔗 Register Here

Take a pause from your busy routine to recharge your mind and celebrate the power of mental wellness. The session is open to all students and faculty

TechFusion 2025, 7th August 2025

TechFusion 2025 – A Resounding Success! 🌟

The Departments of Electronics & Telecommunication Engineering and Artificial Intelligence & Data Science, in collaboration with IETE-SAKEC, proudly organized TechFusion 2025: Telecom, IDEA Lab & AI Insights on 7th August 2025 at Shah & Anchor Kutchhi Engineering College, Chembur.

Over 110 First-Year students and 8 faculty members from St. Xavier’s Technical Institute, Mahim joined us for an immersive afternoon of learning and exploration.

📌 Event Highlights:
📢 Technical Talk – Prof. Khushboo Singh delivered an insightful session on the evolution of telecommunications, 5G, and the future of connectivity.
🛰️ Lab Exploration – Participants toured the SAKEC IETE Center of Excellence, explored the Intel Unnati AI Lab, and discovered innovations at the IDEA Lab.

💡 The event provided a unique opportunity for students to interact with academic and industry experts, fostering curiosity, innovation, and interdisciplinary learning.

We extend our heartfelt thanks to all participants, faculty, and organizers for making TechFusion 2025 a memorable and impactful experience! 🚀

 

Special Guest Lecture on Artificial Intelligence, 2nd August 2025

📢 by Prof. Dhanubhai R. Luhar 🤖✨
Presented by the Department of Electronics and Telecommunication Engineering
In Collaboration with IETE-SAKEC and IETE Centre of Excellence (COE)

Click here for the schedule

An exclusive 4-hour Expert Session on Artificial Intelligence (AI) by the highly acclaimed Prof. Dhanubhai R. Luhar—a visionary educator, entrepreneur, and author of over 200 engineering books.

🧠 About the Speaker:
Prof. Luhar is the founder of Sigma Trainers and Kits, a global leader in training kit manufacturing. With over 40 years of academic and technical experience, he is a pioneer in IoT, Robotics, AI, and Thought-Controlled Technology, seamlessly integrating engineering, innovation, and spirituality.

🔗 Prof. Dhanubhai R. Luhar on LinkedIn

📅 Date: Saturday, 2nd August 2025
🕙 Time: 11:00 AM – 4:00 PM
🏢 Venue: 4th Floor Seminar Hall, SAKEC
💻 Note: Please bring your own laptop for the hands-on session
🎓 Open To: All B.Tech and B.Voc students (Highly recommended for those interested in AI, IoT, Robotics, and Future Tech)

Expert Session on AI, ML, DL & IoT at SAKEC! 🌟

The EXTC Department of SAKEC, in collaboration with IETE & Sigma Trainer and Kits Company, organized an Expert Session on Innovations with Emerging Technologies on 2nd August 2025.

💻 Session Highlights:

  • Hands-on exposure to AI, ML, DL & IoT
  • Live demos on Sigma AI Trainers & Generative AI tools
  • Industry insights and future-ready applications for our students

We express our heartfelt gratitude to our Management and Principal Dr. Bhavesh Patel for their constant guidance and support in successfully conducting this event.

Special thanks to the event coordinators Dr. Kalpana Chaudhari and Dr. Rohan Borgalli for their dedicated efforts in making this session impactful and enriching for our students.

Ansys Technology Day, 9th July, 2025

*Experience the future of engineering simulation – live and hands-on!*
Join us for an exciting *Ansys Technology Day* filled with cutting-edge insights, real-world applications, and a high-energy student competition!
 📅 *Date:* 9th July, 2025
📍 *Venue:* 4th Floor Seminar Hall
🕙 *Time:* 9:30 AM onwards
🎓 *Open to:* All interested students

Success Unfolded at ANSYS Technology Day & Student Challenge 2025! ⚙️📡
Held at Shah & Anchor Kutchhi Engineering College on 9th July 2025, this event brought together innovation, simulation, and hands-on engineering excellence.

With over 60 participants from various years and departments, the workshop featured expert-led sessions by Ms. Kasturi PatilMr. Viki Kohad, and Mr. Manjunath Kundur from ARK Infosolutions. Students explored Multiphysics Simulation, HF Tools, ACT Extension, Antenna Design, and more.

🎯 Highlights:

  • Online quiz to test simulation knowledge
  • Live competition using ANSYS tools
  • Parallel ALH & AIC presentations
  • Certificate & prize distribution ceremony

🏆 Winners:
🥇 Ved Kokane – Final Year, EXTC
🥈 Om Kadam – Third Year, ACT
🥉 Sonal Samai – Final Year, EXTC

🔧 Proud to inspire the next generation of simulation engineers!

MASTER AI and ML APPLICATIONS – SUMMER INTERNSHIP 2025

🚀 MASTER AI & ML APPLICATIONS – SUMMER INTERNSHIP 2025 🚀 Organized by:

Department of Electronics and Telecommunication Engineering, SAKEC In Collaboration with: IETE-SAKEC and IETE-CoE

Duration: June 9th – June 30, 2025 Mode: Offline at SAKEC

The Department of Electronics and Telecommunication Engineering at SAKEC successfully conducted 4 week-long internship program that integrated software development, machine learning, artificial intelligence, automation, and hardware hands-on sessions. The aim was to expose students to interdisciplinary technologies and real-world applications.

The internship attracted students from various departments, including Computer Engineering, and also welcomed participants from other colleges, including a notable group from Ratnagiri. The sessions were led by a mix of industry experts, faculty members, and student mentors.

Objective:The Summer Internship 2025 aimed to provide hands-on exposure and real-world experience in Artificial Intelligence (AI) and Machine Learning (ML) applications across key domains like Embedded Systems, Robotics, Signal Processing, and Wireless Communication.

Program Structure: The internship spanned over 4 weeks with a combination of lectures, live sessions, workshops, and practical project development. Each week culminated in assessments and reviews.

Session-Wise Summary of Activities:

Python & SQL Fundamentals

  • Speakers: Ms. Shwetha Shetty (Python), Ms. Gauri Chavan (SQL)
  • Topics Covered: Python basics, data types, loops, range function, and SQLite database operations such as insert, update, delete.
  • Hands-On: Google Colab exercises and connecting Python with SQLite.

Full Stack Development – Django & PostgreSQL

  • Speaker: Mr. Yash Kesharwani (Industry Expert)
  • Topics Covered: Django project setup, virtual environment, PostgreSQL database configuration, REST API development, .env file usage, Postman testing.
  • Hands-On: Creating models, views, API endpoints, and database integration.

Machine Learning & Data Science

  • Speaker: Ms. Shwetha Shetty
  • Topics Covered: Data cleaning, handling null values, EDA (mean, median, mode, correlation), train-test split, regression, classification, supervised and unsupervised learning.
  • Hands-On: Scikit-learn implementation and data exploration with Python.

Deep Learning

  • Speaker: Dr. Rohan Birgalli
  • Topics Covered: Introduction to neural networks, activation functions, hidden layers, CNN model building, real-world applications.
  • Hands-On: Digit recognition using CNN.

Drone Development

  • Speakers: Mr. Ashish F. and Mr. Dhananjay (Drone Experts from Nashik)
  • Topics Covered: Introduction to drone systems, selecting drone components, ESC, flight controller, propellers, and real-time flight demo.
  • Hands-On: Demonstration of drone flying in the field.

Generative AI & Modern AI Tools

  • Speaker: Mr. Nitin Kukreja
  • Topics Covered: Generative AI concepts, Prompt Engineering, Retrieval-Augmented Generation (RAG), Agentic AI, and use of Ollama.

Python Automation using Robot Framework

  • Speaker: Mr. Vatsalkumar Patel (Avotrix)
  • Topics Covered: Automation of routine web tasks like LinkedIn and Naukri interactions using Robot Framework.

AI + Automation using n8n

  • Speaker: Ms. Sujitha Kurup (Founder, Inovays)
  • Topics Covered: Workflow automation with AI using n8n, automated report generation, task building.

Machine Learning for Music Signal Analysis

  • Speaker: Dr. T. P. Vinutha
  • Topics Covered: STFT, spectrogram analysis, and audio processing using Python.

ARM Cortex-M4 and STM32 Workshop

  • Speakers: Mr. Jagdish Sarode & Ms. Mrunalini Gawfale
  • Topics Covered: Microcontroller architecture, Keil software, 7-segment and LED interfacing.

Raspberry Pi Hardware Integration

  • By: Second-Year SAKEC Students
  • Topics Covered: Hands-on IoT setup and hardware-software interfacing using Raspberry Pi.

Acknowledgements & Appreciation

Special thanks to students from Ratnagiri for their travel and dedication

Appreciation for SAKEC Computer branch students for interdisciplinary collaboration

Heartfelt thanks to EXTC student volunteers and mentors for leading and supporting the program

A total of 58 enthusiastic participants from various engineering colleges across Maharashtra and departments actively took part in this hands-on internship program

The Summer Internship 2025 was a vibrant mix of practical learning, technical workshops, and project innovation. It empowered students with the skills to work on real-world AI/ML applications and contribute meaningfully to the evolving tech landscape.

Feedback and Assessment:

  • Session-wise feedback was collected after each session to evaluate content clarity, speaker delivery, and usefulness.
  • An overall feedback form was shared at the end of the internship to reflect on the entire experience.
  • A final quiz covering all sessions was conducted as part of the formal assessment and certification process.

Conclusion: 

This internship fostered an environment of cross-disciplinary learning, hands-on experimentation, and industry interaction. It served as a strong foundation for students looking to step into real-world tech roles and research-based learning.

SAKEC looks forward to welcoming all participants again for future workshops, hackathons, and innovation programs.

Coordinators:
Ms. Uma Raj | Ms. Shwetha Shetty | Ms. Khushboo Singh
📧 Email: iete@sakec.ac.in

Expert Session on “Waves to Wireless – Exploring Electromagnetics & Antenna Design”

📡 Expert Session Alert!
“Waves to Wireless – Exploring Electromagnetics & Antenna Design”
Organized by EXTC Department, SAKEC in collaboration with IETE-SAKEC under IETE CoE
🗓 Date: 26th April 2025 (Saturday)
🕙 Time: 1:00 PM
🏫 Venue: Lab 303
🎙 Eminent Speaker: Mr. Narendra Dhande, Product Manager, Vitronics India Pvt. Ltd.
Join us for an insightful session on the journey from fundamental EM waves to cutting-edge wireless communication and antenna design techniques!
Why Attend?
✅ Dive into Real-World Antenna Design
✅ Industry Use-Cases & Tools
✅ Q&A with the Expert
Open to TY & LY EXTC and SY ACT students.
Be there & stay ahead in the wireless game!

Industry Expert Talk and Hands-On Workshop on “FPGA Design using Vivado”, 19th April 2025

Title: Industry Expert Talk and Hands-On Workshop on “FPGA Design using Vivado”
Organized by: EXTC Department, SAKEC in collaboration with IETE-SAKEC and IETE COE
Date: Saturday, 19th April 2025
Time: 10:00 AM onwards
Venue: Lab 307, SAKEC
Resource Person: Mr. Tejas Shilwant, FPGA Design Engineer, Paras Anti-Drone Technologies       Pvt Ltd
Special Guest: Mr. Sarvan Tejas, Junior Engineer, Paras Anti-Drone Technologies Pvt Ltd

Total Participants: 42

Faculty coordinators: Ms Shwetha Shetty and Dr. Anusaka Gon, SAKEC

Objective of the Workshop:

To provide students with hands-on exposure to FPGA design principles using Vivado, and to bridge the gap between academic concepts and industry practices in digital system design.

Session Highlights:

  • Inauguration and Welcome
  • Expert Talk by Mr. Tejas Shilwant
  • Guidelines on Choosing an FPGA
  • Detailed Overview of Artix-7 FPGA
  • Interactive Q&A and Project Discussion Session
  • Hands-On Demonstration Session

The EXTC Department of SAKEC, in collaboration with IETE-SAKEC and under the banner of the IETE Centre of Excellence, successfully organized an Industry Expert Talk and Hands-On Workshop on “FPGA Design using Vivado” on Saturday, 19th April 2025, at Lab 307. The session was conducted by Mr. Tejas Shilwant, an FPGA Design Engineer at Paras Anti-Drone Technologies, accompanied by Junior Engineer Mr. Sarvan Tejas. The event aimed to bridge the gap between academic learning and industry expectations by introducing students to the practical aspects of FPGA architecture and design.

Mr. Tejas began the session with an engaging talk on the significance of FPGAs in today’s rapidly evolving tech landscape, particularly in defense and embedded systems. He shared his industry experience and provided a detailed walkthrough of the FPGA design flow using the Vivado Design Suite, emphasizing the relevance of VHDL for designing synthesizable digital systems. A key highlight of the session was the discussion on how to choose an appropriate FPGA, where students were guided through essential parameters such as logic resources, speed, power consumption, and toolchain compatibility. In this context, the Xilinx Artix-7 FPGA was introduced in detail, showcasing its features such as low power consumption, integrated DSP slices, block RAMs, and its suitability for both academic and industrial applications.

The session also included a valuable hands-on demonstration in which participants observed the process of designing and implementing block RAM (BRAM) using IP (Intellectual Property) in Vivado. Students learned how to create and instantiate BRAM components, simulate their behavior, and understand data read/write operations in VHDL. Following this, an interactive discussion took place where students enthusiastically posed questions, discussed their ongoing and future projects, and explored how FPGA could enhance their applications in areas like signal processing, sensor interfacing, and embedded system development.

The event saw active participation and positive feedback from students, who found the session highly informative and motivating. The blend of technical insight and practical demonstration encouraged many to consider FPGA design for their final-year projects. The event was also promoted on SAKEC’s and IETE-SAKEC’s official social media platforms, further amplifying its reach and impact. Overall, the workshop proved to be a valuable learning experience, fostering curiosity and innovation among the participants

The workshop successfully introduced participants to the world of FPGA design using Vivado. It bridged theoretical concepts with practical exposure, igniting curiosity and technical confidence among students to explore programmable logic in real-world applications.

Microcontrollers Mini Project Exhibition

The Department of Electronics and Telecommunication Engineering, in collaboration with the SAKEC Robo Club and IETE-SAKEC, proudly presents:

⚙️ MICRO-MASTER EXPO 2025
(Under the banner of Oscillation 2025)

🗓️ Date: 19th April 2025
🕘 Time: 9:00 AM onwards
📍 Venue: 4th Floor Seminar Hall, SAKEC

This exciting *Project Expo# is a platform to showcase your Mini Projects based on Microprocessor and Microcontroller – bringing your concepts to life!

Why You Should Participate:
✅ Present your technical skills
✅ Gain valuable feedback from peers and faculty
✅ Receive a Participation Certificate
🏆 Winners will be awarded with attractive Cash Prizes!

Event Coordinators:
👨‍🏫 Prof. Jagdish Sarode
👨‍🏫 Prof. Mrunalini Gavfale

Gear up, innovate, and make your project count!
Let’s make MICRO-MASTER EXPO 2025 a celebration of creativity and tech excellence!

ISF Congress 2025 – Connected Everything: IoT and Smart Systems for the Future,28th March 2025

🌍 ISF Congress 2025 – Connected Everything: IoT and Smart Systems for the Future

📅 Date & Time: 28th March 2025 | ⏰ 9:00 AM – 4:00 PM
📍 Venue: Shah & Anchor Kutchhi Engineering College (SAKEC), Mumbai
👥 Organized by: Electronics & Telecommunication Engineering, SAKEC 🎓 in association with IETE Mumbai Centre

For  details:


🌟 About the Event

ISF Congress 2025 – Detailed Event Report

Venue: Shah & Anchor Kutchhi Engineering College (SAKEC), Mumbai
Date: 28th March 2025
Time: 9:00 AM – 5:00 PM

Event Summary

The ISF Congress 2025 was successfully held at Shah & Anchor Kutchhi Engineering College (SAKEC), Mumbai on 28th March 2025, bringing together students, academicians, and industry experts for a day of knowledge sharing, technical discussions, and innovation showcase. The event witnessed participation from 60 project groups and around 187 students from various colleges of the West Zone of IETE. Among these, 27 groups participated in Project Demonstrations, 20 groups in Paper Presentations, and 13 in Poster Presentations.


✨ Event Highlights

🎤 Keynote Session – Industry experts share insights on IoT innovations & future trends 🚀
🗣️ Panel Discussion – Experts debate on AI-driven IoT & Smart Systems 🧠🔗
📜 TechSymposium (Paper Presentation) – Research showcase on IoT, AI, Cybersecurity, & more! 📑
🔬 InnovateX (Project Demo) – Live working prototypes of IoT & AI solutions 🎛️
🎨 VisionBoard (Poster Presentation) – A visual research exhibition on AI & Edge Computing 📊


🏆 Competition Categories & Prizes

Winner Details

  • TechSymposium – Paper Presentation
Prize Paper Title Name of Students  Name of College
First Zero Hazard Unmanned Exploration Surveillance (ZEUS) Udit Shishodiya, 

Shreyans Vora, Shreeya Kadam, Ananyaa Kotlaapure, 

Shah And Anchor Kutchhi Engineering College
Second Design and Prototype Implementation of Health Monitoring Device Atharva Dhakate, Viraj Kakade K J Somaiya College of Engineering
Third Open Cloud Experiment Vinay Gawai, Mihir Gosavi Vidyavardhini College of Engineering and Technology
  • InnovateX – Live Project Demonstration
Prize Project Title Name of Students  Name of College
First Modernizing Candlelight Testing: Leveraging IoT for Accurate and Safe Toxic Gas Detection in Indian Sewage Pipelines Sanika Vivek Tajane, Zaid Sagir Ahmed Ansari, Anujkumar Yadav, Suraj Nile Shah and Anchor Kutchhi Engineering College
Second Self balancing 2.0 Jayesh Anil sable, Siddhesh Anand, Tanushri Ganesh, Vishnu Yogesh Viva college of technology
Third Breathe Clean Vidhi Navin Gajra, Viral Kantilal Jain Shah and Anchor Kutchhi Engineering College
  • VisionBoard – Poster Exhibition
Prize Poster Title Name of Students  Name of College
First Optimization of latency in 5g networks Prathamesh Rajendra Kahar, Atharva Prasad Joshi, Yash Prakash Kadam, Harsh Sudhakar Salvi MCT’s Rajiv Gandhi Institute of Technology
Second FastWrite: Automation

of Code

Documentation

Aditya Mer, 

Oam Bhanushali, 

Rishikesh Giridhar

K J Somaiya College of Engineering
Third AI – Based Wagon Weight Tracker Sanidha Nilamani Panda, Aayush Yashwant Patil, Siddhesh Suresh Sharma, Mithil Naresh Ega Shah And Anchor Kutchhi Engineering College

Participation Statistics

    • Total Participants Groups: 60
    • Total Students Participated: 187
    • Breakdown of Technical Participation:
      • Project Demonstration: 27 groups
      • Paper Presentation: 20 groups
      • Poster Presentation: 13 groups
  • Total Number of colleges: 15

Conclusion

The ISF Congress 2025 was a grand success, fostering technical discussions, innovation, and networking opportunities. The event provided a platform for students to showcase their research and projects, while industry experts shared valuable insights on emerging technologies. The active participation of students, faculty, and industry leaders contributed to making this a memorable and impactful event for all attendees.

 

Power Seminar on Design Thinking – Unlock Creativity & Innovation, 29th March 2025

🚀 Power Seminar on Design Thinking – Unlock Creativity & Innovation!💡

📢 Shah & Anchor Kutchhi Engineering College, Mumbai
🎓 Department of Electronics & Telecommunication Engineering
🌿 In collaboration with ICT Academy & SAKEC TBI
📅 Date: 29th March 2025 Time: 11.00 Am
💻 Mode: Online
👥 Who Can Attend? All Students & Staff
✨ Why Attend?
✅ Master creative problem-solving & innovation 🧠
✅ Learn from industry experts 🎤
✅ Explore real-world applications of Design Thinking 🔎
🎙️ Special Guest Speaker:
We are thrilled to welcome Rahul N as a distinguished speaker
Rahul N — Project Lead at StartupTN, Certified Chief Innovation Officer, and Draper University Alumnus.
Dr. Abdul Kalam Young Achiever Awardee 🏆
TEDx Organizer and Techstars Startup Weekend Facilitator
Founder of Multiple Startups and Mentor to Entrepreneurs
🌿 Focused on: Empathy, Mapping, Prototyping & Feedback Analysis
🔗 Connect with Rahul N LinkedIn Profile : https://linkedin.com/in/rahul-n-97051b66
No Registration Fee
Don’t miss the opportunity to gain insights from a visionary leader shaping the entrepreneurial ecosystem!
#SAKEC #DesignThinking #PowerSeminar #Innovate #ICTAcademy #SAKECTBI #FutureReady 🚀🔥
📩 For Queries: Contact us
Dr. Rohan Borgalli (Event Coordinator) – 📞 9821057992

Industrial Visit to IIRS Dehradun and SCL Chandigarh, 2025

From 6th January to 15th January 2025, the IETE-SAKEC, in association with the Electronics and Telecommunication Engineering DepartmentShah and Anchor Kutchhi Engineering College successfully organized an enriching Industrial Visit to IIRS Dehradun and SCL Chandigarh, attended by 45 enthusiastic students across various academic years.

✨ Highlights of the Visit:

1. Industrial Insights:

   – Semiconductor Laboratory (SCL), Chandigarh: A fascinating exploration of cutting-edge semiconductor technologies.
– Indian Institute of Remote Sensing (IIRS), Dehradun: Eye-opening sessions on space and remote sensing technologies.

2. Scenic and Historical Destinations:

– Jallianwala Bagh, Amritsar: A visit to this historic site, evoking deep respect and remembrance.

– Wagah Border, Amritsar: Witnessed the patriotic flag-lowering ceremony, a moment of national pride.

– Rock Garden & Sukhna Lake, Chandigarh: Explored the artistic creations at Rock Garden and enjoyed the serene beauty of Sukhna Lake.

– Golden Temple, Amritsar: A spiritual retreat offering peace and tranquility.

– Har Ki Pauri, Haridwar: A divine experience of the Ganga Aarti.

– Hidimba Temple, Manali: A peaceful retreat amidst the cedar forests, showcasing the region’s rich cultural heritage.

– Monastery, Manali: Experienced spiritual serenity and Tibetan culture in the beautiful monastery.

3. Recreational Activities:

   – DJ Night and Bonfires: Fun-filled evenings with music and camaraderie under the starry skies.

This successful event was made possible by the dedicated efforts of:

– Faculty Coordinator: Mr. Rohan Borgalli

– Faculty Representative: Ms. Shwetha Shetty  and Dr. Neha Shukla for their guidance and exceptional planning.

Special thanks to Dr. Bhavesh Patel, Principal, SAKEC, and the college management for their constant encouragement and support.

 Participant Feedback:
Students appreciated the perfect blend of professional growth and leisure, highlighting the thoughtfully curated itinerary that balanced education and rejuvenation.

 Memories Captured:
Visit the trip’s album to relive these unforgettable moments of learning, exploration, and connection.

Stay tuned for more such transformative journeys!

Winter Internship Program 2024 & Advanced Internship Program

The SAKEC-IETE Centre of Excellence (COE), in collaboration with the Electronics & Telecommunication Engineering Department, successfully concluded two transformative initiatives: the Winter Internship Program 2024 and the Advanced Internship Program.
💻 Program Highlights:
– Winter Internship Program 2024:
   – Duration: 16th December 2024 – 4th January 2025
   – Participation: 30 students from various streams.
   – Key Features:
     – Hands-on training on *Ansys HFSS 3D Electromagnetic Simulation Software* and *Vector Network Analyzer (VNA)*.
     – Capstone projects solving real-world electromagnetic and telecommunication challenges.
– Advanced Internship Program:
   – Duration: 16th December 2024 – 4th January 2025
   – Participation: 08 students from various Institute.
   – Key Features:
     – Advanced training with industry-standard tools.
     – Focus on skill development in high-demand engineering fields.
🏆 Key Achievements:
– Enhanced technical proficiency with cutting-edge tools.
– Problem-solving and teamwork skills developed through project-based learning.
– Career readiness with specialized knowledge bridging the gap between academia and industry.
✨ Both programs were hosted at Lab 303, SAKEC IETE-COE, providing access to state-of-the-art facilities and expert instructors.
We extend our heartfelt gratitude to the program coordinators Ms. Mamta Tikaria, Mr. Rohan Borgalli and Ms. Khushboo Singh, expert speaker Dr. Pramod Bhavarthe, Technical staff Ms. Minakshi Sanas and Ms. Alpa Mahadik, Mr. Kailash Mirkute, Ms. Vandana Pawar and the Head of the EXTC Department, Dr. T. P. Vinutha, for their dedicated efforts in making these programs successful. Special thanks to the Principal of SAKEC, Dr. Bhavesh Patel, for his visionary leadership and support. We also appreciate the enthusiastic participation of students and the support from the college management, which made this event a grand success.
📢 Positive feedback from participants highlights the programs’ success in fostering innovation, technical excellence, and industry readiness.

TechFusion – Telecom, Cyber Security & AI Insights on Social Media, 2024

Event Highlight: TechFusion – Telecom, Cyber Security & AI Insights
The Electronics and Telecommunication Engineering Department at SAKEC, in collaboration with IETE-SAKEC, successfully hosted the TechFusion event on September 6, 2024, at our Center of Excellence Labs!
 Event Highlights:
– Participants: 120 First-year Diploma students and 7 faculty members from St. Xavier’s College.
– Engaging Sessions: A technical talk on the evolution of telecom and 5G by Prof. Khushboo Singh.
– Interactive Lab Visits: Participants explored the latest technologies in our Telecom, Cyber Security, and AI labs, gaining hands-on experience with cutting-edge equipment and projects.
Special Mentions:
– Dr. T. P. Vinutha, HoD of Electronics and Telecommunication Engineering, for her motivating words at the beginning of the event.
– Mr. Rohan Borgalli for coordinating entire Event
– Dr. Nilakshi Jain, HoD of Cyber Security, and Dr. Pravin Shinde, HoD of AIDS, for their valuable support.
– Dr. Bhavesh Patel, Principal and the SAKEC management for their constant support and encouragement.
Key Outcomes:
Insightful knowledge on telecom, cybersecurity, and AI
Hands-on practical exposure through lab visits
Networking opportunities with industry experts
 Inspiration for future studies and career paths
We thank all participants, faculty members, and volunteers for making this event a huge success!
Stay tuned for more such exciting events at SAKEC!
#TechFusion #Telecom #CyberSecurity #AI #SAKEC #IETESAKEC #EngineeringExcellence

SAKEC-IETE CoE EXTC-ACT Department Internship Program 2024

Success Story: SAKEC-IETE CoE EXTC-ACT Department Internship Program 2024!

The SAKEC-IETE Centre of Excellence (COE) and Internship Cell, in collaboration with the Electronics & Telecommunication Engineering and Electronics & Communication (Advanced Communication Technology) Department, Shah and Anchor Kutchhi Engineering College, successfully organized an internship program “Ansys HFSS 3D Electromagnetic Simulation Software and Vector Network Analyzer (VNA)” from 10th June to 29th June 2024.This program was designed to provide students with hands-on training in Ansys HFSS 3D electromagnetic simulation software and the use of a Vector Network Analyzer (VNA). The internship aimed to bridge the gap between academic knowledge and industry applications, giving students a competitive edge in their future careers.

We’re thrilled to announce the successful completion of our cutting-edge internship program!
24 brilliant minds from across Maharashtra mastered:
– Ansys HFSS 3D Electromagnetic Simulation
– Vector Network Analyzer (VNA)
– Antenna Design & RF Device Testing
 Highlights:
– Hands-on training with industry experts
– Capstone projects showcasing real-world solutions
– Special session on IEEE paper writing by Dr. Pramod Bhavarthe, Associate Professor, SAKEC
– Industry expert talk by Dr. Swetha Amit from Entuple Technologies, Bengaluru
Our interns are now equipped with:
– Advanced technical skills
– Research and publication knowledge
– Practical fabrication experience
– Industry-ready expertise
The grand finale featured an exciting project exhibition, demonstrating the incredible talent and innovation of our participants!
A big thank you to our speakers, technical staff, and coordinators for making this internship a resounding success!
Stay tuned for our next program – Your gateway to cutting-edge electronics and telecommunication skills!
#SAKECInternshipSuccess #EXTCEngineering #IETE #AntennaDesign #RFEngineering #StudentInnovation

TechVision – Project Poster Presentation Competition 2024

The Electronics & Telecommunication Department, in collaboration with IETE SAKEC and IETE-CoE, orchestrated the “Oscillations 2024” technical poster presentation interdepartmental competition on April 3rd, 2024, starting from 10:30 am. The event served as a platform for undergraduate students across diverse academic disciplines to showcase their research acumen and technical prowess.

Judging the competition were Mr. Amey Gawde, Manager at Reliance Jio, and Mr. Rakshith Poojary, Senior Analyst at Accenture. A total of 38 participants, comprising nine groups of Final Year EXTC students and two groups of Third Year EXTC, presented their project work through poster presentations. The assessment criteria included the novelty of ideas, poster quality, project implementation, and the clarity of presentation..

The following are the winners of the Poster Presentation Competition:

  1. 1st Prize: Yash Shere, Eesha Shah and Darshil Patel

Project Title: “ElectraRecruit: Connecting EXTC Students with Core Domain Careers”

Class: BE- EXTC

  1. 2nd Prize: Prathamesh Paikade, Karthik Poojary, Sarvesh Salkar and Yogesh Thombare

Project Title: “Virtual Eyes: Deep Learning Vision for visually Impaired”

Class: BE-EXTC

  1. 3rd Prize: Varad Chopdar, Manas Desai, Chaitanya Toraskar, Siddhesh Bagwe

Project Title: “Extracting Vocal Essence Flute Signal Elimination via Filtering”

Class: TE- EXTC

ISRO Industrial Visit, March 2024

The Industrial Visit organized by IETE SAKEC and the Electronics and Telecommunication Engineering Department of Shah and Anchor Kutchhi Engineering College from February 29 to March 7, 2024, provided an enriching experience for 37 students. Mr. Rohan Borgalli and Ms. Amisha Bhoir were the dedicated faculty coordinators throughout the journey.

In this Industrial Visit, Students delved into a world of exploration and learning. Highlights included visits to iconic landmarks like the Padmanabhaswamy Temple, Jatayu Earth Centre, and Vivekananda Rock Memorial, as well as an immersive experience at the ISRO Propulsion Complex in Tamil Nadu. The students attended interactive sessions with ISRO scientists, gaining invaluable insights into space propulsion technology. Beyond the technical, they explored historical sites like Vattakottai Fort and enjoyed serene moments at Kovalam Beach and Alleppey Boating.

The industrial visit served as a valuable opportunity for students to bridge theoretical knowledge with practical exposure, fostering a deeper understanding of their fields of study. As we departed, the memories and insights gained during this journey would undoubtedly contribute to our academic and personal growth.

 

InnovateX: Crafting Tomorrow’s Solutions – Technical Paper Writing Workshop & Presentation Showdown, 23 March 2024

InnovateX: Crafting Tomorrow’s Solutions – Technical Paper Writing Workshop & Presentation Showdown(using NDLI club platform)

Organizers:

  • IETE-SAKEC
  • SAKEC Library
  • SAKEC-IETE COE
  • Department of Electronics & Telecommunication Engineering

Event Name: InnovateX: Crafting Tomorrow’s Solutions – Technical Paper Writing Workshop & Presentation Showdown

Date: March 23, 2024

Time: 10:30 AM

Venue: Lab 301 & 302, 3rd Floor, SAKEC

Objective:

The event aimed to foster innovation in cutting-edge technology by providing participants with opportunities to engage in a Technical Paper Writing Workshop and a Presentation Competition. It sought to enhance participants’ skills in crafting compelling technical papers using LATEX and presenting innovative projects effectively.

Participants:

A total of 30 students from various departments attended the event, representing a diverse range of interests and expertise within SAKEC.

Speaker:

Dr. Pramod Bhavarthe, an Eminent Researcher, conducted the Technical Paper Writing Workshop. His expertise and insights enriched the learning experience for the participants.

Event Overview:

  • Technical Paper Writing Workshop:
    • The workshop commenced at 10:30 AM with Dr. Pramod Bhavarthe providing valuable insights and techniques for crafting compelling technical papers using LATEX.
    • Participants learned about the structure of technical papers, effective writing styles, and tips for enhancing the quality of their research papers.
    • Practical demonstrations and hands-on exercises enabled participants to apply the concepts learned during the workshop.
  • Presentation Competition:
    • Following the workshop, participants engaged in a Presentation Competition where they showcased their innovative projects to a panel of esteemed judges and fellow participants.
    • Each participant was given a designated time slot to present their projects, followed by a Q&A session where judges and peers provided feedback and asked questions.
    • Presentations covered a diverse range of topics, including advancements in electronics, telecommunications, and related fields.
    • Participants demonstrated their communication skills, technical knowledge, and innovative thinking through engaging presentations.

Key Outcomes:

  • Participants gained valuable insights into technical paper writing techniques and LATEX formatting.
  • The Presentation Competition provided a platform for participants to showcase their innovative projects and receive constructive feedback.
  • Interaction with peers and judges facilitated knowledge sharing and networking opportunities.
  • The event contributed to fostering a culture of innovation and collaboration within the SAKEC community.

Conclusion:

“InnovateX: Crafting Tomorrow’s Solutions” was a successful event that achieved its objective of fostering innovation and enhancing technical skills among participants. The engaging workshops and presentations showcased the talent and creativity of SAKEC students, reaffirming the institution’s commitment to nurturing future leaders in technology.

Acknowledgments:

We extend our sincere thanks to Dr. Pramod Bhavarthe for his invaluable contributions as the speaker for the Technical Paper Writing Workshop. We also appreciate the efforts of the organizing committee, judges, and all participants for their enthusiastic participation and contributions towards making the event a resounding success.

Arduino Basics to IoT Real-Life Applications Workshop

Unlock the World of Innovation: Arduino Basics to IoT Real-Life Applications Workshop!!!

Date: 10 February, 2024
Time: 1:00 pm Onwards
Location: 7th Floor Auditorium, SAKEC

Participants Count- Total 67 participants

Speaker: Ms. Amisha Bhoir and Mr. Santosh Kamble

Organized by SAKEC’s Technology Business Incubator and Product Development Cell, the Electronics & Telecommunication Engineering Department, in collaboration with IETE-SAKEC and IIC6.0, successfully conducted an insightful workshop aimed at exploring the vast realm of innovation through Arduino and IoT technologies.

Workshop Highlights:

  • Arduino Fundamentals and Programming: Participants delved into the basics of Arduino, understanding its architecture, components, and programming essentials. The workshop provided a solid foundation for both beginners and those seeking to enhance their Arduino skills.
  • Sensor Interfacing: The event covered the essential aspect of sensor interfacing, allowing participants to grasp the intricacies of connecting sensors to Arduino boards. This segment focused on practical applications and hands-on experience.
  • IoT Integration: The workshop explored the integration of Arduino with the Internet of Things (IoT), showcasing the potential of combining hardware and software for innovative solutions. Participants learned to connect their Arduino projects to the internet, enabling remote monitoring and control.
  • Real-Life Applications: Attendees gained insights into real-life applications of Arduino and IoT through practical examples and case studies. The workshop emphasized the practical implementation of these technologies in various industries and sectors.
  • Hands-On Experience: A significant aspect of the workshop was the hands-on experience provided to participants. They had the opportunity to work on Arduino boards, sensors, and IoT modules, translating theoretical knowledge into practical skills.
  • Expert Guidance: Experienced instructors and experts in the field of Arduino and IoT provided guidance throughout the workshop. Participants had the chance to interact with professionals, gaining valuable insights and tips.

The workshop attracted a diverse audience, including students of all years and departments, to explore the potential of Arduino and IoT technologies. The collaborative efforts of SAKEC’s Technology Business Incubator, Product Development Cell, and the supporting organizations ensured the success of the event, providing a platform for learning, networking, and fostering innovation. Participants left the workshop equipped with new skills, practical knowledge, and a renewed enthusiasm for exploring the world of Arduino and IoT. Total 67 participants were attended the event

Student Development Program (SDP) on “Hands-on workshop on the Applications of AI” – January 2024

The Electronics & Telecommunication Engineering Department, in collaboration with IETE-SAKEC & IETE-CoE of Shah & Anchor Kutchhi Engineering College, recently organized a Student Development Program (SDP) in the form of a hands-on workshop on the Applications of AI. The event, held on January 6, 2024, featured two distinguished international speakers: Dr. Sanjan T.P. Gupta, a Machine Learning Scientist from the Biosciences Cluster, Corporate Research Labs, USA, and Mr. Prateek Verma, an expert international speaker from Stanford University, USA.

Dr. Gupta’s session focused on “Explore Generative AI & NLP in Healthcare,” offering a comprehensive overview, theoretical foundations, and a hands-on workshop exploring applications in medical image analysis, patient records, and clinical decision support. Mr. Verma’s session, “Dive into Multimodal Generative AI: Seeing, Hearing, Reading,” delved into advanced topics within Generative AI, emphasizing integrating visual data, textual information, and auditory components for comprehensive healthcare solutions. The workshop concluded with positive participant feedback, expressing appreciation for the practical demonstrations and a keen interest in applying AI concepts to healthcare research projects.

The expert speakers’ insights added depth to their understanding, and they expressed interest in further exploring Generative AI and NLP applications in specific domains. Overall, the workshop successfully enriched participants’ knowledge, equipping them to explore innovative solutions within the healthcare domain using advanced AI technologies. Combining theoretical insights, hands-on activities, and expert discussions contributed to a well-rounded learning experience. A total of 30 students from various departments participated in the workshop.

This SDP aimed to provide participants with a holistic view of Generative AI and NLP applications in healthcare, combining theoretical insights with practical, hands-on activities. Dr. Bhavesh Patel, the Principal, delivered closing remarks, and Mr. Rohan Borgalli, the Coordinator, expressed gratitude in the vote of thanks. The participants appreciated the in-depth coverage of multimodal AI concepts, finding the practical demonstrations insightful and applicable.

  

The 6-Day FDP on “AI Evolution: From Foundations to Generative AI”, 1st to 6th Jan 2024

Date: January 1st – 6th, 2024

Organizers: IETE-SAKEC, IETE Centre of Excellence(CoE), TechSaksham (TSP)

Speakers by: Edunet Foundation

SAKEC Co-ordinators: Mr. Rohan Borgalli and Ms. Gauri  Chavan

 

IETE Approved 6-Day Faculty Development Program (FDP) on “AI Evolution: From Foundations to Generative AI”, in collaboration with IETE-SAKEC and IETE Centre of Excellence under the TechSaksham initiative. This program is proudly supported by TechSaksham (TSP), a joint CSR initiative of Microsoft and SAP, in collaboration with AICTE – ATAL and implemented by Edunet Foundation.

The Faculty Development Programs (FDPs) under TechSaksham are dedicated to enhancing technical capacity within institutes and fostering large-scale skill development among faculty members.

Day 1: January 1, 2024

  • Welcome Note and LMS Introduction
    • Dr. T. P. Vinutha, HoD, Department of Electronics & Telecommunication Engineering, Shah and Anchor Kutchhi Engineering College, welcomed participants.
    • Mr. Ramar introduced the Learning Management System (LMS).
  • Introduction to AI
    • Mr. Ramar Bose and Mr. Mayank Shrivastava provided insights on Artificial Intelligence and its significance in the contemporary world.

 

Day 2: January 2, 2024

  • Deep Dive into ML with Hands-On Algorithms
    • Mr. Mayank explained exploration of Machine Learning techniques and practical applicatios  of ML algorithms.

Day 3: January 3, 2024

  • Highly Progressive Deep Learning Model with Hands-On by Mr. Ramar Bose
    • Advanced deep learning models and hands-on implementation.
    • This session provided an in-depth exploration of advanced deep learning models. Participants engaged in hands-on experience, implementing progressive deep learning techniques, enhancing their practical skills. The session covered cutting-edge concepts, pushing the boundaries of deep learning applications. Overall, attendees gained valuable insights into progressive models, fostering a deeper understanding of their applications and contributing to the advancement of their expertise in the field.

Day 4: January 4, 2024

  • Session Details:

1st Half (10 am – 12 pm): Implementation on ANN, CNN, RNN by Ramar Bose

  • Mr. Ramar Bose introduced the fundamental concepts of Artificial Neural Networks (ANN), Convolutional Neural Networks (CNN), and Recurrent Neural Networks (RNN).
  • Explanation of the role of each type of neural network in machine learning applications.

2nd Half (1 pm – 3 pm): LSTM & Hands-on, Discussion of NLP Techniques by Mayank Shrivastava.

Mr. Mayank covered Long Short-Term Memory (LSTM) networks, providing insights into their architecture and applications. Participants engaged in a hands-on experience, implementing LSTM networks, and delved into the practical aspects of sequential data processing. Additionally, the session included a discussion on Natural Language Processing (NLP) techniques, offering participants a comprehensive overview of NLP applications and methodologies. The practical and theoretical aspects of the session equipped participants with valuable skills in LSTM and NLP for diverse applications.

Day 5: January 5, 2024

1st Half (10 am – 12 pm): NLP Model and Theoretical Discussion on LLM, Practical by Ramar Bose

  • Theoretical deep dive into Large Language Models.
  • Understanding the architecture, training process, and applications.
  • Practical Implementation:
    • Hands-on session conducted by Ramar.
    • Participants engaged in implementing an NLP model.
    • Practical exercises included text preprocessing, model training, and evaluation.

2nd Half (1 pm – 3 pm): Generative AI by Mr. MayankShrivastava

  • Hands-on session led by Mr. Mayank Bose
  • Participants were guided through the implementation of Generative AI models.
  • Real-world examples and case studies were explored.

Day 6: January 6, 2024

1st Half (10 am – 12 pm): Explore Generative AI & NLP in Healthcare, 

Expert International Speaker: Dr. Sanjan T.P. Gupta, 

Machine Learning Scientist at Biosciences Cluster, Corporate Research Labs, USA.

  • In-depth exploration of Generative AI and NLP applications in healthcare.
  • Examination of successful case studies and real-world implementations.
  • Hands-On Session (11 am – 12 pm):
  • Dr. Sanjan T.P. Gupta conducted a practical, hands-on workshop.
  • Participants engaged in the implementation of Generative AI and NLP techniques in healthcare scenarios.

 

2nd Half (1 pm – 3 pm): Dive into Multimodal Generative AI: Seeing, Hearing, Reading, 

Expert International Speaker: Mr. Prateek Verma, Stanford University, USA

  • In-depth exploration of how Generative AI can be extended to handle multiple modalities such as images, text, and sound simultaneously.
  • Discussion on the challenges and opportunities in developing multimodal AI models.
  • Program Concluded by address by Dr. Bhavesh Patel, Principal, 

Shah & Anchor Kutchhi Engineering College, Mumbai

  • Vote of Thanks given by Mr. Rohan Borgalli, Coordinator, expressed gratitude to participants, speakers, and sponsors.
    • Valuable feedback received from participants.
    • Assessment conducted through LMS.
    • Certificates of participation distributed.

This FDP provided an extensive exploration of AI, from foundational concepts to advanced models, with hands-on sessions and expert talks. The collaboration with TechSaksham, Microsoft, SAP, and the involvement of international speakers added significant value to the program, contributing to the participants’ knowledge and skill development in the field of Artificial Intelligence. Total 144 participants from various colleges of India participated in the faculty development program.

“Visit to Nanofabrication facility, IITB” Oct 2023

Department of Electronics and Telecommunication Engineering is collaboration with IETE SAKEC organized a visit to Nanofabrication facility, IITB on Saturday, 28/10/2023 for TE EXTC students. This visit was carried out for students to make them aware of different Fabrication processes involved in VLSI Design and the facilities available at IITB.

31 students with two faculty members Mr. Shridhar Sahu and Mrs. Gauri Chavan visited the facility which consisted of clean rooms, lithography equipment, sputtering process, molecular beam epitaxy and many more.

At IITBNF, there is a class 1000 cleanroom that has a maximum of 1000 foreign particles per cubic feet of air inside. The lithography process is used to write patterns on a resist layer (Photo lithography and Electron beam lithography) and the technique needed to transfer these patterns from the resist onto the main layer of the semiconductor wafer (Wet etching and Dry etching). Students also learnt about oxidation, thin film deposition and sputtering. All in all, it was a wonderful learning experience. The visit took 3 hours to be completed. The overall feedback from students was very motivating.

Before leaving the campus, a token of appreciation was presented to the IITBNF team for guiding the group of students and faculties throughout the visit.

Workshop on “Applications of DSP concepts in Speech & Music domains”, Oct 2023

IETE SAKEC in association with the Department of Electronics & Telecommunication Engineering Have organized Hand-on workshop on “Applications of DSP concepts in Speech & Music domains”  on Saturday, 14/10/2023 for TE and BE EXTC students.This workshop was carried out for students to make them aware of  Praat/MATLAB based teaching approach for the discrete /real-time signal processing.

The speaker for the above event was Dr.Shrikant Joshi , assistant professor working in the department of Electronics & Telecommunication engineering at Vishwakarma Institute of Information Technology,Pune.

The various topics covered in the above event were Fourier transform ,Laplace transform,Fourier Spectrum (including Fast Fourier Spectrum) analysis: spectrograms and windowing.Spectogram analysis for audio signals. The workshop mainly consist of  computer demonstration or simulation that relates the theory to real-world signals, especially speech signal processing and their applications. Students also learnt much about Praat software. All in all, it was a wonderful learning experience. The overall feedback from students was very motivating. Before leaving the campus, a token of appreciation was presented to the speaker for guiding the students and faculties throughout the workshop.

After the event quiz based on the workshop was conducted to test the knowledge gained by the students throughout the workshop. The feedback is also conducted from the participants.

“Expert talk on 5 G Technology”, Oct 2023

The department of Electronics and Telecommunication Engineering in association with IETE-SAKEC and SAKEC – IETE Centre of Excellence had organized an Expert talk on 5 G Technology on 11/10/2023 from 11 am to 12.30 pm. The speaker Mr. Amey Gawde Sir, Manager, Reliance Jio addressed various aspects of 5G, including its impact on industries, infrastructure, and its potential to reshape communication globally. Discussed its potential applications in autonomous vehicles, smart cities, healthcare, and beyond. This glimpse into the future left attendees excited about the possibilities that 5G brings. The Expert Talk on 5G Technology was a resounding success, leaving attendees with a deeper understanding of the technology’s significance. Around 53 students of BE attended this event.

“One Day Industrial Visit to Doordarshan Kendra, Worli, Mumbai” Oct 2023

Department of Information Technology and Electronics Telecommunication Engineering in association with IETE-SAKEC and IIC6.0, organized a one day industrial visit to Doordarshan Kendra, Worli, Mumbai on 06 October 2023.
Industrial Visit to Doordarshan Kendra provided an insightful glimpse into the inner workings of India’s premier public broadcasting organization. 21 Students from various departments and 3 Faculties had the opportunity to witness the production and broadcasting processes of television and radio programs, gaining practical knowledge about studio operations, content creation, and the latest broadcasting technologies.
This immersive experience enriched participants’ understanding of the media industry and fostered a deeper appreciation for Doordarshan’s role in disseminating information and entertainment to the masses.
The visit was a valuable educational experience, showcasing the convergence of tradition and technology in the broadcasting world.

The “Telecommunication at Glance”, 19 August, 2023

Event Title: Telecommunication at Glance

Date: 19 August, 2023 Time: 1.00 Pm to 5.00 Pm

Location: SAKEC IETE Center of Excellence, [Lab 303], Shah & Anchor Kutchhi Engineering College, Chembur.Mumbai

Participants: Diploma Students of St. Xavier’s Technical Institute, Mahim, Mumbai 

85 Students and 6 Staff Visited for Event

Organized by: Electronics and Telecommunication Engineering in collaboration with IETE-SAKEC, organized The “Telecommunication at Glance” event. It was a comprehensive program aimed at providing attendees with insights into the world of telecommunications. The event featured technical talk by department faculty member and a visit to the SAKEC IETE Center of Excellence to enhance participants’ understanding of the field.

Event Highlights:

  1. Technical Talk:
  •       The event began with an informative technical talk conducted by Prof. Monika Budania, Asst. Prof., Electronics & telecommunication Engineering SAKEC. This talk covered a wide range of topics, including:
  •       Evolution of telecommunication

Emerging Technologies in Telecommunications.

  •       5G and Its Impact on the Industry.

. AR/VR applications of 5G.

  •       The Future and scope of the Telecommunication field.
  •       Telecommunication Infrastructure and Networking.
  •       Each talk was followed by a Q&A session, allowing participants to engage with the speakers, ask questions, and gain deeper insights into the subject matter.
  1. Visit to SAKEC IETE Center of Excellence:
  •       After the technical talks, participants had the opportunity to visit the SAKEC IETE Center of Excellence. This state-of-the-art facility provided hands-on experience in telecommunication technology.
  •       During the visit, attendees were able to:
  •       Explore advanced telecommunication equipment like vector network analyzer, spectrum analyzer, modulation and demodulation analog and digital  trainer kits , microwave test bench, Antenna components and many more in the laboratories.
  •       Witness live demonstrations of cutting-edge technologies and projects of EXTC students like air quality index monitoring, line follower robot, agricultural quadcopter, smart dustbins, smart robots etc.
  •       Interact with faculty and experts to gain practical knowledge.

Students were also shown a VR technology live demonstration.

  1. Networking and Collaboration:
  •       The event facilitated networking among participants, speakers, and industry professionals. It provided a platform for attendees to connect, exchange ideas, and explore potential collaborations in the field of telecommunications.
  1. Conclude:
  •       All participants filled the feedback forms to acknowledge their attendance and engagement in the event.

The “Telecommunication at Glance” event at SAKEC IETE Center of Excellence was a resounding success, offering valuable insights into the dynamic world of telecommunications. Attendees left with enhanced knowledge, a broader perspective on industry trends, and valuable connections within the telecommunication community. This event served as a testament to the importance of continued education and networking in the ever-evolving field of telecommunications.

The launch of the SAKEC IETE Excellence center on 28th July 2023

Launch of SAKEC IETE Center of Excellence (CoE)

The Department of Electronics & Telecommunication Engineering in Collaboration with IETE SAKEC has organized the launch of the SAKEC IETE Excellence center on 28th July 2023 from 3:00 pm to 5:00 pm at SAKEC IETE Center of Excellence Lab 303 (3rd floor), and it brought together experts, dignitaries, and enthusiasts from the field of electronics and telecommunications. The SAKEC IETE Center of Excellence Launch Event was a resounding success. 

Highlights of the event:

Inauguration: The event began with a grand inauguration ceremony, featuring a ribbon-cutting by Shri Jayantilal Keshavji Chhadva, Chairman and Shri Navin Karamshi Shah, Managing Trustee of Shah & Anchor Kutchhi Engineering College followed by the lighting of the traditional lamp.

Keynote Address: Keynote address by the chairperson of IETE Mumbai, a renowned figure in the field, delivered an inspiring keynote address, emphasizing the importance of technological innovation and collaboration in the modern world.  After that Dr. Bhavesh Patel sir, Principal of Shah and Anchor Kutchhi engineering college have motivated the staff and students by his kind words. For this event the Execom members of IETE Mumbai were also present.

Center Overview: A comprehensive overview of the IETE Center of Excellence was presented, highlighting its mission, goals, and areas of focus. 

Technical Talk: Ms. Meenaskshi Singhvi from DD kendra Mumbai presented a technical talk on “The Future of Video technology” in this session speaker have elaborated about various new video technology which have implemented in DD kendra mumbai which includes how we can use various sound effects and also by using cloud computing which includes migrating traditional video infrastructure to the cloud, addressing key industry challenges and opportunities. Topics included 5G technology, IoT advancements, and the future of telecommunications. 

Memorandum of Understanding (MoU) Signing: MoUs were signed between the IETE and SAKEC, marking the beginning of promising collaborations.

Technology Showcases: Attendees had the opportunity to explore cutting-edge technologies and innovations through interactive exhibits and demonstrations. 

Networking: The event facilitated networking among professionals, researchers, and students, fostering valuable connections within the field. 

The inauguration and technical talk was live streamed in lab 301 & Lab 302 for students. Students took active participation in this inauguration. The Center of Excellence will give good opportunity to students to interact with outside world.

The event concluded with closing remarks expressing gratitude to all participants and looking forward to the future of the SAKEC IETE Center of Excellence. Overall, the launch event showcased the IETE’s commitment to advancing electronics and telecommunications and provided a platform for SAKEC students for knowledge sharing and collaboration. It marked the beginning of an exciting journey towards technological excellence.

 

 

Har Ghar Dhyan, 14th July, 2023

Event Name: Har Ghar Dhyan

Organized By: Department of EXTC in Collaboration with IKS SAKEC, ACM SAKEC, SAKEC IIC 5.0 and Art of Living 

Date: 14 th July, 2023

Time: 3PM onwards 

Place: 7 th Floor Auditorium, SAKEC

Staff Coordinator:  Prof. Rohan Borgalli

          Prof. Seema Kawale

          Prof. Monika Budania

Speakers: Ms. Pratima singh & Mr. Yogesh Ralhan

Event outcomes: 

  • To know the benefits of Meditation
  • To learn how to relieve stress, anxiety & depression
  • To enhance one’s ability to manage mind
  • To learn the importance of yoga and exercises 

Description: 

 

The Department of Electronics and Telecommunication Engineering in collaboration with IKS SAKEC, IIC 5.0, ACM SAKEC and Art of Living organized Har Ghar Dhyan Event.  Har Ghar Dhyan is a collaborative initiative of The Art of Living and Ministry of Culture, Government Of India, under the aegis of “Azadi ka Amrit Mahotsav” (AKAM), as a special offering to benefit the citizens on the occasion of 75 years of independence for our Country.

 

Ms Pratima Singh explained the importance of yoga and meditation in our daily life. Spending even a few minutes in meditation can help restore your calm and inner peace as mentioned by her. She informed that during meditation, focus your attention and eliminate the stream of jumbled thoughts that may be crowding the mind and causing stress. This process may result in enhanced physical and emotional well-being. The emotional and physical benefits of meditation were explained by her and concluded as:

 

  • Gaining a new perspective on stressful situations
  • Increasing self-awareness
  • Reducing negative emotions
  • Increasing imagination and creativity
  • Increasing patience and tolerance
  • Improving sleep quality

 

The next speaker Mr. Yogesh Ralhan showed few exercises which can be performed to stretch our body and keep our spine alignment alright. Few Pranayama were performed for the next half hour which included deep breathing in-out session, shaking both the hands, rotating neck etc. In next half hour Ms pratima singh took meditation session in which all the participants were asked to close the eyes and feel emotions, surrounding noise, feel thoughts and in depth meditation was performed. Towards the end of the session she emphasized to carry out meditation daily in order to keep our mind in peace. All the participants enjoyed the session and it was a successful event which taught the importance of Yoga and Meditation. To keep mind healthy one should definitely meditate.

“Oscillations 2023” April 2023

Department of Electronics and Telecommunication Engineering in association with IETE-SAKEC and IIC organized technical poster presentation inter-college Competition under “Oscillations 2023” on 5th April 2023 from 10 am onwards. The event showcased undergraduate students’ research and technical skills from various academic disciplines.
The event was inaugurated in the presence of the ISF Coordinator and HOD(EXTC), Ms. T.P. Vinutha and faculties of SAKEC at 10:00 am in the foyer. It is Coordinated by Ms. Uma Raj, Assistant Professor, Electronics & Telecommunication Engineering Department and the student council of the department.
The judges for the event were Dr. Harvindar Singh Gambhir, Mr. N.K Karnani, Ms Bhakti Garde, Dr.Asha Durafe. All the Final Year SAKEC EXTC students participated in this event and around 26 project groups, having a total of 110 participants, presented their project work through poster presentation. This included 4 groups from other colleges and 6 from other departments of SAKEC. The posters were judged on the basis of their novelty, poster and project implementation as well as presentation of the work.
Throughout the event, participants had the opportunity to interact with the judges and attendees, discuss their research findings, and exchange ideas with other students. The winners of the competition were announced at the end of the event, and cash prizes were awarded to the top performers. The winning posters demonstrated a high level of technical expertise, innovation, and creativity.
The following are the winners of the Poster Presentation Competition:

 

1st Prize:Sharma Dilip, Patel Saim, Kotkar Arpita and Patel Dinesh
Project Title: “NO BARRIER: GESTURE RECOGNITION”
Class & College: BE- EXTC, SAKEC

2nd Prize: a. Yesha Limbachia , Moksha Shah, Harshil Shah and Aditi Bailur
Project Title: “American Sign Language Recognition System and its convertion from Text to Speech”
Class & College: BE- CS, SAKEC

b. Avdhoot Mhatre, Shubhankar Rokade, Yash Sonparote and Shubham Yogi
Project Title: “Crop Recommendation Using Soil and Weather Analysis”
Class & College: BE- EXTC, Lokmanya Tilak College of Engineering

and

3rd Prize:Manas Desai, Varad Choodar, Zaid Ansari and Siddhesh Bagwe
Project Title: “Drunk Driving Prevention System”
Class & College: SE- EXTC, SAKEC

“IoT-Masterclass (NODEMCU-ESP8266)” March 2023

Date: 4th March 2023

Time: 9.30 am to 4.30 pm

Objective:

To provide opportunity for participants to enrich their knowledge and skill in developing various projects for solving engineering problems in society.

Target audience: TE and SE Students ( EXTC & Computer Branch)

Electronics & Telecommunication Department and Computer Engineering Department  in collaboration with IIC 5.0 organized a one day workshop on IoT Masterclass (NodeMCU -ESP8266) on 4 th March, 2023 from 9.30 am onwards.

Resource Person: Prof. Amisha Dhawal Bhoir (M.E. EXTC)

No. of students participated: 32

Each team was provided with the IOT kit which contained the following items: 

  • ESP8266 node-MCU 
  • Micro USB 
  • LED 
  • Temperature and Humidity Sensor (DHT11)
  • LDR sensor 
  • IR Sensor (HW-201)
  • Breadboard 
  • Jumper wires

The Internet of Things (IoT) is a system of interrelated computing devices, mechanical and digital machines, objects, animals or people that are provided with unique identifiers and the ability to transfer data over a network without requiring human-to-human or human-to computer interaction.

 

The workshop involved the concepts to be taught to the students: 

SESSION 1: Introduction to IoT

  • What is IoT?
  • Basics of NodeMCU ( ESP8266)
  • NodeMCU Compatibility with Arduino IDE

 

SESSION 2: Sensors & Its Interfacing with ESP8266 NodeMCU

 

  • Introduction to Sensor Modules
  1. IR Sensor Module ( HW-201)
  2. LDR Sensor Module
  3. Temperature & Humidity Sensor Module (DHT-11)
  • Sensors Interfacing With NodeMCU ESP8266
  1. Detecting Objects Using the Infrared(IR) Obstacle Sensor With NodeMCU ESP8266
  2. Interface LDR module with NodeMCU ESP8266
  3. Interfacing of DHT11 Sensor With NodeMCU ESP8266

SESSION 3: Projects done by students during workshop

The following were the tasks (Projects) done by students as a part of the workshop: 

Task:1 Blink LED with NodeMCU ESP8266

Task:2 Interface LDR Module with NodeMCU

Task:3 Interface IR Module with NodeMCU

Task:4 Interface DHT11 Module with NodeMCU

Demo 1 :Connect a NodeMCU WiFi module to the internet.

 

“Use of Knimbus Database” Feb 2023

Department of Electronics & Telecommunication Engineering in association with SAKEC NDLI and Library Club under SAKEC-IIC5.0 organized an event on ” Use of Knimbus Database ” on 4th February 2023 from 10.30 am to 12.00 noon, specially for Faculty of all department. The event aimed to familiarize faculty with the NDLI Club, provide insights into effectively utilizing the Knimbus Database, showcase the diverse resources available, and empower faculty to create and share their own resources. The librarian Ms. Gowri P. shared information about NDLI club and speaker Ms. Kanishka Jindal gave information on the extensive array of resources accessible through the NDLI Club and Knimbus Database. This encompassed academic papers, e-books, journals, video lectures, and more. Emphasis was placed on the diverse subjects and formats available, catering to the needs of various academic disciplines. Faculty members were guided through the user interface, search functionalities, and advanced features. Demonstrations included efficient ways to explore academic literature, multimedia content, and other educational resources available through the Knimbus platform. Around 40 participants attended this event.

“Winter Internship on VLSI Design” Jan 2023

Shah and Anchor Kutchhi Engineering College in association with IETE Mumbai and IIC 5.0 organized winter Internship on VLSI Design from 26th December 2022 to 6th January 2023. The internship was organized with an aim to make the students industry ready in the field of VLSI Design. In the first part of the internship, lecture and practical sessions were conducted by Dr. Sushma Srivastava and Prof. Shridhar Sahu for 5 days starting from 26th December 2022. The lecture sessions included MOSFET physics, MOSFET operation, CMOS inverter design, CS amplifier design. The designed circuits were implemented and simulated in the industry standard CADENCE toolset’s Virtuoso tool. They were taught to design schematic as well as layout of the circuit and perform different types of simulations as required. They were also taught to generate the GDS-II stream file which is given for fabrication.

The students were then assigned a problem statement on the design and implementation of a current source load CS amplifier based on the knowledge acquired during the lecture and practical sessions held earlier. They completed this project in the remaining period of the internship and a competition was conducted based upon the design and specifications achieved.. They were supposed to design the circuit for the required specifications on paper and then implement and simulate the circuit on the Virtuoso tool. After successfully designing and implementing the schematic of the circuit, the students had to design the layout of the circuit and perform the post layout simulations for the same parameters and were expected to achieve minimum change as compared to schematic simulations.

The students were divided into six groups and performed overwhelmingly well and all groups achieved the required specifications by designing and implementing the circuit designed on the virtuoso tool. Rubrics were disseminated to the participants at the start of the competition and the groups were graded accordingly. Viva-voce was part of the rubrics and was conducted by Mr. Abhishek Kadam, IITB Research Scholar. Top two performers were awarded winner certificates and prize money. Mr. Abhishek Kadam delivered a session on VLSI Chip Design Flow & Neuromorphic Engineering on the last day of the internship and after that, valedictory function was conducted which was graced by the presence of Dr. Bhavesh Patel, Principal SAKEC, Mr. Abhishek Kadam, Dr. Vinutha T. P., ISF SAKEC Coordinator, Dr. Sushma Srivastava, Prof. Shridhar Sahu and students. Dr. Bhavesh Patel talked about the increasing demand in the field of VLSI Design and the relevance of this internship. All students were presented with the participation certificates by Mr. Abhishek Kadam

“International Joint Internship training program” Sept to Dec 2022

International Joint Internship training program on AI and Machine Learning for Urban Development and management

Date: 17 Sept. 2022 to 31 Dec 2022

Location: Shah and Anchor Kutchhi Engineering College

Organizers: The event was organized by Department of Electronics & Telecommunication Engineering, Shah and Anchor Kutchhi Engineering College and Department of Architecture (DiARC) the University of Naples "Federico II" Naples, Italy.

Objective: The primary objective of the event was to provide a platform for students and researchers to explore and apply AI and Machine Learning techniques to address challenges in urban development.

Participants: 60 Students (10 Project groups) of various Departments participated in this internship.

Keynote Speakers: The event featured renowned experts in the field of AI and urbandevelopment who delivered inspiring keynote speeches.

Panel Discussions: Expert panels discussed the current challenges and future prospects of AI and ML in urban development.

Speakers Details
1) Dr. Ferdinando Di Martino
2) Dr. Maria Cerreta
3) Dr Sabrina Sacco
4) Dr. Francesca Nocca

Internship coordinators:
1. Dr. Kalpana Chaudhari (Assistant Professor EXTC , SAKEC)
2. Mr. Rohan Borgali(Assistant Professor, EXTC SAKEC)
3. Mr. Bhushan pawar (Assistant Professor ,EXTC SAKEC)
4. Dr. Maria Cerreta (Associate Professor, DiARC University of Naples "Federico II")
5. Dr. Pasquale Detoro (Associate Professor , DiARC University of Naples "Federico II")

Workshops: Several hands-on workshops were conducted, focusing on practical applications of AI and ML in urban planning, transportation, sustainability, and more. Internship Opportunities: Students had the opportunity to connect with international
organizations for internships related to urban development using AI-ML. To guide them mentors are allocated to each batch.

Mentors: Dr. Kalpana Chaudhari, Asst. Prof., Electronics & Telecommunication Engineering
Mr. Rohan Borgalli, Asst. Prof., Electronics & Telecommunication Engineering
Mr. Bhushan Pawar, Asst. Prof., Electronics & Telecommunication Engineering

Research Presentations: Participants were encouraged to form inter-department teams and work on collaborative AI-ML projects with the guidance of mentors. Students finds the problem statement in discussion with mentor and the provided the solution. Students completed their projects and presented their projects and research findings in presentation and demonstration.

Networking: The event provided a platform for participants to network with professionals, academicians, and potential employers.

Outcomes:
 Enhanced understanding of AI and ML applications in urban development. Promotion of international collaborations among students and institutions.
 Opportunities for students to gain real-world experience through internships.
 Knowledge sharing and exposure to the latest trends in AI-ML for urban development.
 5 Project groups submitted their project to International Conference and 4 out of that got published in IEEE Conference. and also one project presented in Idea market session , SRI2023 ,Sustainability Research innovation , 26-30 June 2023 , Panama
city , Panama

Paper Publications List :
1. . Krishna Nair, Priyank Jhaveri , Rohan Borgali , Road Maintenance system Using
YOLOV7 , 2023 3 rd international conference on pervasive computing and social
networking , 19-20 June 2023

2. Saumya Gudelily, Sandhya Jaiswal , Rohan Borgali , Machne Learnng Framework
for Breast Cancer Detection , 3 rd international conference on Artificial intelligence and
smart energy IICAIS2023),IEEE xplore part number CFP OAB: ISBN: 978-1-6654-
6216-7

3. Dr. Kalpana Chaudhari, Dhruvi Joshi, Pratik Harugade, Kritik Jambusariya,Vaibhav
Tiwari ,Predicting Mumbai Air Quality index by Machine Learning , 2023 4 th
International conference for emerging technology (INCET)Belgaun, India,May26-28
2023 , 979-8-3503-3575-0, IEEE , DOI:1109/INCET57972.2023.10170420

“Fun with Robotics Programming” Sept. 2022

Shah and Anchor Kutchhi Engineering College, Mumbai, Department of Electronics and Telecommunication Engineering in association with SAKEC Robo Club was organized an event on “Fun with Robotics Programming” on 28th September 2022 Time – 10AM – 3PM Venue:- Seminar Hall, 4th Floor, Specially for 12th/Diploma passed out Candidates.
Topics covered:
Introduction to Microcontroller
Sensors & Actuators
Basics Robotics
e-Yantra Robots
Programming of e-Yantra Robot

Total 38 Participants attended

“SAKEC MOVIE CLUB Launch” Sept. 2022

Department of Electronics & Telecommunication Engineering in Collaboration with MUSE foundation under SAKEC Movie club have organized event on Climate Change on 14th Sept. 2022 at SAKEC 4th floor seminar hall.
Speaker for the event was Mr. Tanmay Shinde (Environmentalist & IT professional) he explained how climate change is affecting world with use case cases. Total 53 Participants attended.

“TECHXCELLENCE- Technical Poster Presentation Competition 2022” September 2022

Department of Electronics and Telecommunication Engineering in association with IETE-SAKEC an organized initial round of TECHXCELLENCE- Technical Poster Presentation Competition, on the occasion of the Anniversary of IETE Mumbai on 10 Sept. 2022 virtually in MS Teams. An open platform for presenting innovative ideas in various concepts through technical posters and competing tip-to-tip with the peers of MU. 

The event is Judged by Dr. T.P. Vinutha, HOD EXTC, SAKEC, and Mr. Sagar Vijay Mhatre, Asst. Prof. at K J Somaiya Institute of Engineering and Information Technology, Mumbai.

Participation Certificate is provided for all Participants.

*Winners of Initial Rounds are as follows*

1st Prize:Sachin Chandraprakash Singh, Pallavi Pandey, Meetali Jain, and Shivam Prajapati
Project Title: KHOJ

2nd Prize: Miloni Gada, Kashish Maru, Mit Sheth and Saivignesh Adepu
Project Title: Fasal- A crop recommendation system


3rd Prize: Saahil Rakesh Shukla, Vivek Shravan Gupta, Zeel Hitesh Shah, and Harsh Hitesh Gala
Project Title: Destiny – An Indoor Navigation System

and
3rd Prize: Dilip Ramesh Sharma, and Saim Vidyanand Patel
Project Title: FPGA-BASED WASHING MACHINE

The above groups will be participating in the Final round at IETE Mumbai Centre, Chembur (In Person) *September 14, 2022* at 3.00 pm onwards

13 Project groups of various Departments participated in this Event. The event was concluded by Dr. T.P. Vinutha, HOD EXTC & ISF Coordinator with her Motivating words. All Participants and Winners will be awarded Certificates.

 

“Visit to Nanofabrication facility, IITB” Sept. 2022

Department of Electronics and Telecommunication Engineering in association with IETE-SAKEC organized a visit to Nanofabrication facility, IITB on Saturday, 24/9/2022 for TE and BE EXTC students. This visit was carried out for students to make them aware of different Fabrication processes involved in VLSI Design and the facilities available at IITB.
45 students with two faculty members Mr. Shridhar Sahu and Mrs. Gauri Chavan visited the facility which consisted of clean rooms, lithography equipment, sputtering process, molecular beam epitaxy and many more.

“Introduction to Ethical Hacking” July 2022

IETE SAKEC in association with the Department of Electronics &
Telecommunication Engineering Have organized a five day workshop on “Introduction to
ethical hacking” from 19th July 2022 to 25th July 2022.
The speaker for the above event was Ms. Seema Kawale , assistant professor working
in the department of Electronics & Telecommunication engineering. This Event was
organized for the third year students of the EXTC department.
The various topics covered in the above event were Footprinting / reconnaissance
tools hands on, Mirroring of target website using various tools, Hackers’ Search engine some
examples and hands on , Network trace routing in windows and linux, Scanning using Nmap
and social engineering, Hacking of web application, Cryptography techniques.
After the event quiz based on the workshop was conducted to test the knowledge gained by
the students throughout the workshop. The feedback is also conducted from the participants.

“Online Project Poster Presentation Competition 2022” April 2022

Department of Electronics and Telecommunication Engineering in collaboration with IETE-SAKEC conducted “Online Project Poster Presentation Competition 2022″ on 26/04/2022.
All the Final Year SAKEC EXTC students participated in this event and around. 10 project groups presented their project work through poster presentations.
Each Project Group was given 08 min for the presentation followed by QA session with the Expert Panel and other faculties.
This Event was conducted in 2 days
1. 16/4/2022: Subission of poster.
2. 26/4/2022: Presentation of submitted poster in front of External Panel
The event was judged by Expert Panel (Prof. Asha Durafe and Prof. Archana Chaugule). Around 50 people witnessed this event which Included all participating students and faculties.
The following groups are the winners of the Online Project Poster Presentation
1st Prize: Durgesh Raut, Sahil Chari, Samrat Parab and Harsh Pawar
Poster Title: – “Smart Agriculture Crop Monitoring System”
Guide: Ms. Gauri Chavan
2nd Prize: Sanjana Suresh, Vibha Manral, Khushi Punmiya and Siddhant Sharma
Poster Title: – “Unmanned Aerial Systems”
Guide: Mr. Rohan Borgalli
3rd Prize: Siddhi Sakpal, Rinkal Vaje and Nikam Kadambari
Poster Title: – “Touch less waste segregation from open space”
Guide: Dr. Kalpana Chaudhary.
3rd Prize: Dhyaneshwari Katkar, Mayuresh Gadkari, Shruti Chaudhari and Amey Shirke
Poster Title: – “Sign Language Recognition”
Guide: Dr. T. P. Vinutha.
The event was concluded by Dr. T.P. Vinutha, HOD EXTC & ISF Coordinator with her Motivating words. All Particiants and Winners will be awarded Certificates.

“Online Technical Paper Presentation Competition, Oscillation 2022” March 2022

Department of Electronics and Telecommunication Engineering in collaboration with IETE-SAKEC conducted “Online Technical Paper Presentation Competition” under Oscillation 2022, a technical initiative started under IETE on 23/03/2022.
All the Final Year SAKEC EXTC students participated in this event and around. 13 project groups presented their project work through paper presentations.
Each Project Group was given 08 min for the presentation followed by QA session with the Expert Panel and other faculties.
This Event was conducted in 2 days
1. 23/3/2022: Presentation of all submitted papers in front of Internal Panels
2. 6/4/2022: Presentation of shortlisted papers in front of External Panel
The event was judged by Expert Panel (Dr. Uttara Gogate and Prof. Preethi Warrior). Around 80 people witnessed this event which Included all participating students and faculties.
The following groups are the winners of the Online Technical Paper Presentation
1st Prize: Parth Powale, Khushank Mehta, Sarvesh Naik, Rachit Kothari
Paper Title:- “Stock Market Prediction Analysis using Machine Learning”
Guide: Ms. Mamta Tikaria
2nd Prize: Mohit Naik, Shubham Raut, Nir Vadhan
Paper Title:- “Tagging boosted hadronically decaying top quark by Machine Learning”
Guide: Dr. T. P. Vinutha
3rd Prize: Ritu Patil P, Pratik Nalawade, Aditya Joshi, Atish Dani
Paper Title:- “Smart Cap For Visually Impaired Person”
Guide: Mr. Jagdish Sarode
The event was concluded by Dr. T.P. Vinutha, HOD EXTC & ISF Coordinator with her Motivating words. All Particiants and Winners will be awarded Certificates in Oscillation 2022 Valedictory Function on 16th April, 2022 at Shah and Anchor Kutchhi Engineering College, Chembur, Mumbai

“Brahmavidya- your key to health and success” February 2022

Department of Electronics and Telecommunication Engineering in association with IETE SAKEC organized an Online Webinar, ‘Brahmavidya- your key to health and success’ on 05 Feb. 2022 at 11.00 Am.
The event was started with introducing NDLI Portal and Club by Ms. Gauri Prasad and then welcoming speaker Mr. Ramesh Karandikar, Brahmavidya followed by a soulful prayer of Brahmavidya preparing everyone for the session.
The speaker explained the following points
What is Brahmavidya?
how it is useful for our mental and physical health, and
how it helps us breathe right and think right.
The session was very interactive. Around 56 attendees were present for the session.
It ended with a 10 minutes meditation. The feedback form was filled out by the participants. All the participants received a certificate from MHRD through NDLI portal.

Accredited with 'A' Grade (2021) by NAAC for 5 years
Ranked in band 251-300 (2020) by NIRF
UG Programs for Computer, IT & EXTC Accredited by NBA
UG Programs for Computer & IT granted 'permanent affiliation' by University of Mumbai

 

Website powered by ALV Works

Admission 2025-26